Decking NS-10 (profiled sheet)
First of all, it is an ideal option for a fence, as well as NS-10 corrugated board is used for partitions, facade cladding, suspended ceilings, roof hemming and, of course, for roofing. When used on the roof, in case of a slight slope slope, for an additional margin of structural strength, it is recommended to use a solid crate under the NS-10 corrugated board.
efficient and economical use of sheet cuttings and reduces the amount of waste when installing on complex roofs. > Name
NS-10 corrugated profile drawing
First of all, it is an ideal option for a fence, as well as NS-10 corrugated board is used for partitions, facade cladding, suspended ceilings, roof hemming and, of course, for roofing. When used on the roof, in case of a slight slope slope, for an additional margin of structural strength, it is recommended to use a solid crate under the NS-10 corrugated board.
efficient and economical use of sheet cuttings and reduces the amount of waste when installing on complex roofs. > Name
Profile drawing of NS-10 corrugated board
First of all, it is an ideal option for a fence, as well as NS-10 corrugated board is used for partitions, facade cladding, suspended ceilings, roof hemming and, of course, for roofing. When used on the roof, in case of a slight slope slope, for an additional margin of structural strength, it is recommended to use a solid crate under the NS-10 corrugated board.
efficient and economical use of sheet cuttings and reduces the amount of waste when installing on complex roofs. > Name
Profile drawing of NS-10 corrugated board
First of all, it is an ideal option for a fence, as well as NS-10 corrugated board is used for partitions, facade cladding, suspended ceilings, roof hemming and, of course, for roofing. When used on the roof, in case of a slight slope slope, for an additional margin of structural strength, it is recommended to use a solid crate under the NS-10 corrugated board.
efficient and economical use of sheet cuttings and reduces the amount of waste when installing on complex roofs. >
NS-10 corrugated profile drawing
First of all, it is an ideal option for a fence, as well as NS-10 corrugated board is used for partitions, facade cladding, suspended ceilings, roof hemming and, of course, for roofing. When used on the roof, in case of a slight slope slope, for an additional margin of structural strength, it is recommended to use a solid crate under the NS-10 corrugated board.
efficient and economical use of sheet cuttings and reduces the amount of waste when installing on complex roofs. > Name
Profile drawing of NS-10 corrugated board
First of all, it is an ideal option for a fence, as well as NS-10 corrugated board is used for partitions, facade cladding, suspended ceilings, roof hemming and, of course, for roofing. When used on the roof, in case of a slight slope slope, for an additional margin of structural strength, it is recommended to use a solid crate under the NS-10 corrugated board.
efficient and economical use of sheet cuttings and reduces the amount of waste when installing on complex roofs. > Name
Profile drawing of NS-10 corrugated board
Professional flooring (profiled sheet) NS-10 Galvanized width 1.19 (1.10) m thickness 0.65 mm
A positive distinguishing feature of NS-10 corrugated board manufactured by TPK The center of the metal roof is the correct overlap - along the lower crest of the wave.
First of all, this is an ideal option for a fence, as well as NS-10 corrugated board is used for partitions, facade cladding, suspended ceilings, roof hemming and of course - for roofing. When used on the roof, in case of a slight slope slope, for an additional margin of structural strength, it is recommended to use a solid crate under the NS-10 corrugated board.
efficient and economical use of sheet cuttings and reduces the amount of waste when installing on complex roofs. > Name
Profile drawing of NS-10 corrugated board
First of all, this is an ideal option for a fence, as well as NS-10 corrugated board Galvanized 0.50mm GOST is used for partitions, facade cladding, suspended ceilings, roof hemming and of course - for roofing. When used on the roof, in case of a slight slope of the slope, for an additional margin of structural strength, it is recommended to use a solid crate under the NS-10 corrugated board. 0.50mm GOST from TPK Center Metal Roofing has a symmetrical profile, which allows efficient and economical use of sheet cuttings and reduces the amount of waste during installation on complex roofs. h2>
Name | Value | Total sheet width | 1190 mm |
Working sheet width_x000 D_ | 1100 mm |
Overlap | 90 mm |
Height of corrugated board wave 00D_ | 0 ,50mm |
Galvanized | |
Sheet length | Customized up to 12 meters |
Profile drawing NS-10 Galvanized 0.50mm GOST
A positive distinguishing feature of the NS-10 Galvanized profiled sheet, width 1.19 (1.10) m thickness 0.45 mm, produced by TPK Center Metal Roofing is the correct overlap - along the lower crest of the wave.
First the queue is ideal for a fence, as well as corrugated board NS-10 Galvanized 0.45 mm is used for partitions, facade cladding, suspended ceilings, roof hemming and, of course, for roofing. When used on the roof, in case of a slight slope of the slope, for an additional margin of safety of the structure, it is recommended to use a solid crate under the NS-10 corrugated board. 0.45 mm from TPK The center of metal roofing has a symmetrical profile, which allows efficient and economical use of sheet trimmings and reduces the amount of waste during installation on complex roofs. >
Name | Value |
Total sheet width | 1190 mm |
Working sheet width | 1100 mm |
Overlap | 90 mm |
Height of corrugated board wave > | 0, 45 mm |
Profile decking | Galvanized |
Profiled sheet color | Galvanized |
Sheet length | Customized up to 12 meters td> |
Profile drawing of NS-10 corrugated board galvanized 0.45mm
Profiled sheet (profiled sheet or corrugated board) NS-10 (NS10-1100) Galvanized 0.40 mm economy with a wave height of 10 mm is the most popular profile in & nbsp; Izhevsk due to its versatility, inexpensive and sufficiently strong profiled sheet NS-10 Galvanized 0.40 mm economy is used for sewing fences, roofing roofs, finishing facades of buildings. overlap - along the lower crest of the wave.
First of all, this is an ideal option for a fence, as well as NS-10 corrugated board Galvanized 0.40 mm economy is used for partitions, facade cladding, suspended ceilings, roof hemming and of course - for roofing. When used on the roof, in case of a slight slope of the slope, for an additional margin of safety of the structure, it is recommended to use a solid crate under the NS-10 corrugated board. with a total width of 1190 mm, has a symmetrical sheet profile, which allows efficient and economical use of sheet trimming and reduces the amount of waste when installing on complex roofs, finishing complex facades. 10 Galvanized 0.40 mm economy