Insulation, films, isolon

Delta Neo Vent is a three-layer diffusion membrane for universal use, it can be used both on insulation and on solid flooring. Can serve as a temporary roof.

Description of the DELTA®-NEO VENT film

• Under-roof diffusion membrane for pitched roofs with single-layer or double-layer ventilation, ventilated facades and floors . Mounted on insulation or solid flooring. Can be used on cold roofs.
• It has a 3-layer structure, the layers are joined by ultrasound at the molecular level.
• Non-woven material produced using innovative BiCo technology with increased UV protection and increased strength without increasing the mass of the material.
• The reinforced bottom layer protects the inner functional layer from mechanical damage due to burrs and sharp edges of the solid wood deck and rafter legs. Due to this, the membrane is classified as a "formwork" material.
• Can be used as a temporary roof in combination with DELTA® system accessories (sealing and connecting tapes, adhesives).

Application of DELTA®-NEO VENT film

DELTA®-NEO VENT is mounted parallel to the eaves when laid on the rafters and secured with staples/nails with a wide head. On ridges / ridges of insulated roofs, it is laid with an overlap. The gluing of the overlaps is carried out with a one-sided tape DELTA®-MULTI-BAND, the sealing of the points of attachment of the counter-lattice with nails is protected by the tape DELTA®-SCHAUM-BAND or DELTA®-DICHT-BAND.

It is recommended to glue the membrane to the drip / eaves strip with DELTA®-THAN adhesive, double-sided DELTA®-DUO TAPE or single-sided DELTA®-MULTI BAND.

On cold roofs or insulated roofs with double-layer ventilation, the film is mounted with ventilation gaps on the ridges /ridges, tight or with a sag of no more than 2 cm.

Technical characteristics of the DELTA®-NEO VENT film